7
Jumper Settings on MB967
JP6, JP5, JP4: Bypass LANs & Reboot Setting
JP2: Clear CMOS Contents
Use JP2 to clear the CMOS contents. Note that the ATX-power connector should be disconnected from the board before
clearing CMOS.
JP3: Clear ME RTC Contents
JP7: Flash Descriptor Security Override
(ME BIOS Update Jumper)
Power ON,
OS run
software
JP4 Pin 1-2 & 3-4
Open
JP5,JP6 Pin 1-2
Closed
System will bypass
LANs upon the time
out of watchdog
timer.
JP4 Pin 1-2 & 3-4
Open
JP5,JP6 Pin 2-3
Closed
System LANs bypass
function controlled by
SIO GPIO43&44 or
BIOS Select.
JP4 Pin 1-2 & 3-4
Closed
JP5,JP6 Pin 1-2
Closed
System will reboot
upon the time out of
watchdog timer.
LAN Bypass &
System reboot
JP4 Pin 3-4 Closed
& 1-2 Open
JP5,JP6 Pin 1-2
Closed
System will bypass
LANs & reboot upon
the time out of
watchdog timer.
LAN Normal &
System reboot
