2
OPERATION INSTRUCTIONS
Control Panel Functions
A
C
B
LED Light Ring
ON/OFF button Mode Button
IMPORTANT！
Your heater is equipped with a
polarized alternating current line
plug (a plug having one blade
wider than the other).This plug will
fit into the power outlet only one
way.This is a safety feature.If you
are unable to insert the plug fully
into the outlet,try reversing the plug.
If the plug should still fail to fit,
contact your electrician to replace
your outlet. DO NOT defeat the
safety purpose of the polarized plug.
● Place the heater on a firm level surface free from obstructions,and at least
3ft. away from any wall and any other objects such as furniture,curtains,plants
or combustible material.
● With the ON/OFF BUTTON “A” in the “OFF” position, plug the heater into
a grounded 120V outlet.
● Press the ON/OFF BUTTON “A” firstly to make heater work,then press
MODE “B” to your desired power setting (FAN,LO, or HI).The LED light ring
“C” will illuminate and turn to different color show different work condition.The
power settings operate as follows:
Blue for fan only
Orange for low heat setting
Red for high heat setting
NOTE:When the unit is turned off,the fan will continue to run for around 15
seconds to cool down.
CAUTION:This heater includes a Thermal Cut-Off Overheat Protection System that
shuts the heater off if it overheats due to abnormal conditions. If this occurs,turn
the heater “OFF”,unplug it, and inspect and remove any objects on or adjacent to
the heater.Allow it to cool for a few minutes,plug it back in,and resume normal
operation.
C
A
B
