17. CAUTION: Avoid the use of an extension cord because the extension cord
may overheat and cause a risk of fire. However, if you have to use an
extension cord, the cord shall be No.14 AWG minimum size and rated not
less than 1875 watts.
18. The output of this heater may vary and its temperature may become intense
enough to burn exposed skin. Use of this heater is not recommended for persons
with reduced sensitivity to heat or an inability to react to avoid burns.
SAVE THESE IMPORTANT INSTRUCTIONS FOR
EASY REFERENCE.
ASSEMBLY
This heater is pre-assembled in factory.
ELECTRICAL RATINGS
This product is rated 10 amps (1200W) at 120V, 60 Hz.
FEATURES
A Power Indicator Light
B Power and Setting Control
OPERATION
Place the heater on a firm, level surface free from obstructions, and at least 3 ft.
(0.9m) away from any wall or combustible material.
With the Power and Setting Control (B) in the OFF( ) position, plug the heater
into a grounded 120V outlet. Always operate the heater in the upright position.
To use the fan function only and no heat needed, Please push the Power and setting
control switch to FAN( ) position, the fan inside will work and Power
Indicator Light (A) will illuminate .
To turn the heater on, please push the Power and Setting Control (B) to HEAT( )
position, the fan and heater inside will both work and Power Indicator Light (A)
will illuminate.
3
