
86
Advance planning for built-in side-by-side refrigerators
same for all model widths.
The installation space
Space is the first consideration when planning the installation.
35-1/2" min. for 36"-wide models
41-1/2" min. for 42"-wide models
47-1/2" min. for 48"-wide models
The cutout depth must be 24"
The cutout depth beneath a soffit
bottom of the soffit.
Electrical
individual properly grounded branch circuit or circuit breaker
must be located on rear wall as shown.
food compartment beneath the climate-control drawer.
Note:
Water line
water line can enter the opening through the floor or back
kit or 1/4" O.D. copper tubing
between the cold water line and the water connection
shut-off valve in the water line is required.
Product dimensions
trim at the front is 1/2" higher and will overlap upper cabinetry
or soffit. Use leveling legs and wheels for a maximum 1"
429Dia8
*84" From
Floor to
Top Frame
36", 42", or 48"
Frame to Frame
35", 41", or 47"
Case Width
Case Depth:
25-3/8" Framed Models
25-3/4" Stainless Steel Models
Depth Including Handles:
26-7/8" Framed Models
27-3/4" Stainless Steel Models
28-11/16" Professional Models
*83-1/2"
at
Rear
Door swing clearances
605Dia5
23-7/8"
Behind
Frame
C
90° Door Swing
4" Min. to Wall
5" Min. for Professional Models
restricted.
Models A B C
36" 13" 15" 20-5/8"
42" 13" 19" 26-5/8"
48" 15" 20" 28-5/8"
*Finished Width
6"
5"
Electrical
Area
84-1/2" max
83-1/2" min
Finished
Opening
75" From Floor
to Bottom
of Electrical
Area
Note: Icemaker
water connection
is at the front.
24"
5"
5"
3-1/2"
Cold Water
Supply
3-1/2"
36" Models 12"
42" Models 18"
48" Models 20"
696Dia15
35-1/2" for 36" models
41-1/2" for 42" models
47-1/2" for 48" models