
Chapter 3 Setup Wizard
WiMAX Device Configuration User’s Guide
31
Note: This settings should be provided by your VoIP service provider.
Figure 12 Setup Wizard > VoIP Settings
The following table describes the labels in this screen.
Table 8 Setup Wizard > VoIP Settings
LABEL DESCRIPTION
Line 1/2 SIP Account - Configure this section to use the PHONE 1 and/or PHONE 2 port.
Enable Select this to activate the SIP account.
SIP Server Enter the IP address or domain name of the SIP server.
Port Number Enter the SIP server’s listening port number.
Subscriber Number Enter your SIP number. In the full SIP URI, this is the part before the @ symbol.
Display Name Enter the name that appears on the other party’s device if they have Caller ID
enabled.
Authentication
Name
Type the SIP user name associated with this account for authentication to the SIP
server.
Password Type the SIP password associated with this account.
Back Click to display the previous screen.
Next Click to proceed to the next screen.