3
Lights of cycle progress
4
START/PAUSE button
5
EXTRA RINSE button
6
OPTIONS button
7
SPIN button
Dispenser box
Prewash
Wash
Softener (do not fill above the MAX symbol
M
)
First use
• Ensure the electrical and water connections com-
ply with the installation instructions.
• Remove the polystyrene insert and all other items
inside the drum.
• Run an initial wash cycle at 90 °C, without any
washing but with detergent to remove any manu-
facturing residue from the drum and tub.
Daily use
Loading washing
• Open the lid of the ap-
pliance.
• Open the drum by de-
pressing the locking
button A: The two
shutters unlock auto-
matically.
• Load the washing,
close the drum and the
lid of your washing machine.
Warning! Before closing the lid of your appliance,
ensure that the drum is properly closed :
• When the two shutters are closed,
• locking button A released.
Proportioning of detergents
Pour the amount of washing into the washing and pre-
wash
compartments if you have selected the “pre-
wash” option. Pour fabric softener into the compartment
if necessary.
A
Selection of desired programme
Turn the programme selector to the required programme.
The “Start/Pause” pushbutton flashes green.
If you turn the programme selector to another programme
while a cycle is in progress, the appliance will ignore the
new selected programme. The “Start/Pause” pushbutton
flashes red for a few seconds.
Selecting the spin speed
Press the “ Spin ” button to change the spin speed, if you
want your washing to be spun at a different speed to the
one selected by the appliance. You can also select “Rinse
hold”
or “No Spin” .
For the maximum spin speeds see "Washing pro-
grammes".
Rinse hold
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing.
No spin
By selecting this option, all spinning phases are sup-
pressed and replaced by a drain, so as not to wrinkle the
laundry. Recommended for extremely delicate fabrics.
4
Downloaded From WashingMachine-Manual.com Manuals
