eciency of additives for stain removal. Add an appropriate amount of
in-wash additive for stain removal (powder) to the manual detergent
dosing compartment, together with your detergent (powder only).
May extend the programme by up to 15minutes. Appropriate for use
with oxygen-based stain removers and bleaching agents. Chlorine or
perborate bleaches must not be used!
Intensive Rinse
Helps to avoid detergent residues in the laundry by extending the
rinse phase. Particularly suitable for washing baby laundry, for people
suering from allergies and for areas with soft water.
Rapid
Enables quicker washing. Recommendable for only lightly soiled
laundry. Not selectable for Cotton 95°C.
FUNCTIONS
Rinse Hold (selectable with Spin button)
Avoids automatic spinning of the laundry at the end of the programme.
The laundry remains in the last rinse water, the display indicates the
rinse hold and the programme does not continue. Suitable for delicate
laundry which is not appropriate for spinning, or which should be spun
with a low spin speed. Not suitable for silk. To end the “Rinse hold”
function, choose between:
• drain the water, no spin:
turn the knob to select spin speed “0” and press “Start/Pause”: the
water will be drained and the programme ended.
• spin the laundry:
the default spin speed blinks - start the spin cycle by pressing
“Start/Pause”. Or select a dierent spin speed by turning the knob,
press it to conrm, and press “Start/Pause”.
Dosing Aid
Helps to dose the right amount of detergent for your laundry load.
Prepare the option as described in DOSING AID / FIRST USE in the User
Manual.
• After you have loaded the laundry, closed the door and selected
programme and options, press the Dosing Aid button. The button
lights up.
• Start the programme by pressing “Start/Pause”. The drum rotates
to detect the laundry load; the display indicates the load sensing
phase. On the control panel, an animation occurs. Afterwards the
recommended detergent amount for the main wash compartment
in ml appears on the display. If you have selected “Prewash”
option, the display alternately shows the amount for prewash (I)
and main wash (II) compartment.
• Pull out the detergent dispenser and pour the recommended
detergent quantity into the main wash (II) and, if Prewash is
selected, also into the prewash (I) compartment of the detergent
dispenser.
• Close the detergent dispenser (or the door) and press “Start/Pause”
to continue the programme.
Finish In
Enables to have the laundry ready at a particular time by setting a delay
until end of the programme. Choose a delay up to 23 hours. Do not use
liquid detergent with this function.
• Select programme, temperature and options.
• Press the “Finish in” button - the symbol over the button lights up.
• Turn the knob to select a delay up to 23 hours. Conrm the desired
delay by pressing the knob.
• When you have nished your settings, press “Start/Pause” - the
countdown of the delay starts. The display indicates that Finish in
is active and that the washing machine is in waiting mode.
• The programme starts automatically, in time to be nished at the
end of the delay period. On programme start, the delay on the
display is replaced by the remaining programme duration.
To cancel the delay
• either press “Start/Pause” to cancel the delay; to start the selected
programme immediately, press “Start/Pause” again;
• or press and hold On/O to cancel the complete programme
setting.
Key Lock
To lock the buttons and knob of the control panel against unwanted
operation. To lock:
• The washing machine must be switched on.
• Press and hold the option key until the key symbol on the control
panel lights up. Knob and keys are locked now. Only “On/O”
works.
If you switch the washing machine o and on again, the key lock will
remain active until you unlock it.
To unlock: press and hold the option key again for at least 3 seconds,
until the key symbol goes o.
INDICATORS
Door can be opened
Energy / Water monitor
Gives feedback about the energy and water consumption of
your programme setting. The less indicators light up, the more
economic is your programme setting. Can still adapt after
sensing phase of laundry load.
Failure
Observe the display message. For any failures , refer to section
Troubleshooting in the “User Manual”.
Descale and clean machine alert
A display message will remind you regularly (around every 100cycles)
to descale and clean your machine to reduce limescale and bad odour
formation. To cancel the display reminder, press the knob. WPRO
limescale and grease remover is the suggested professional product
for the maintenance of your washing machine. Please follow the
instructions for use on the packaging. For orders and information
contact the after sales service or www.whirlpool.eu
Whirlpool will not be held responsible for any damage caused by the
use of other washing machine cleaning products available on the
market.
