EN
5
SETTINGS
The following settings can be changed / selected:
Display language / key tones / cycle end alert/ display contrast /
water hardness / 6th Sense Live feature / eco mode (automatic
switch-o function after programme end) / auto dosing on or o
(permanently enable or disable automatic detergent dosing) /
calibration (adapt dosing amount of the Tanks to the
recommendations of your detergent or softener) / Tank 2 content (=
set Tank 2 to detergent or softener) / return to factory settings.
• Press the Settings button.
• Select the setting which you want to change by pressing the UP or
DOWN key. Afterwards press the OK key.
• Press the UP or DOWN key to set the desired value or choose from
the menu, afterwards conrm by pressing the OK key.
• To exit the Settings mode, either press UP or DOWN key until the
display indicates that you can exit – then conrm by pressing the
OK key. Or wait for a few seconds until the Settings mode will be
ended automatically.
10. RESET A RUNNING PROGRAMME, IF NEEDED
• Press and hold the “On/O” button until the display
indicates that the programme is cancelled.
The water drains, the programme ends and the door
unlocks.
11. SWITCH OFF THE WASHING MACHINE AFTER
PROGRAMME END
• The display indicates that the cycle has ended, and the
“Door open” indicator lights up – you can take out your
laundry
• Press “On/O” to switch o the washing machine. If you do not
switch it o, the washing machine will switch o automatically
after about a quarter of an hour after programme end, to save
energy.
• Leave the door ajar, so that the inside of the washing machine can
dry.
