116
Commercially available products usually consist
of a dye colour, fixing agent and salt.
Pour the dye colour, fixing agent and salt directly
into the empty drum, and only then load the
laundry.
• Only use products designed for use in
washing machines.
• Follow the manufacturer’s instructions.
• Plastic and rubber components of the
machine can be stained by dyes.
WHEN TO REMOVE THE FILTER
• Check and clean the filter at least 2 or 3 times
a year.
• When the appliance does not drain or spin
properly.
• When the pump is blocked by an object
(buttons, coins, safety pins).
Important: Make sure that the water has
cooled before draining.
REMOVING THE FILTER
1. Switch off the appliance.
Open the filter cover with a coin
3. Place a tray or container beneath the cover.
Slowly turn the filter anticlockwise without
unscrewing it completely.
5. Wait until all the water has drained off.
Now unscrew the filter completely and
remove it.
7. Remove any foreign material from the filter.
8. Check that the pump rotor moves freely.
9. Insert the filter and screw it in clockwise until
it locks.
10. Pour 1/2 litre of water into the detergent
drawer and check that water does not leak
from the filter.
11. Close the cover.
DYEING
REMOVING THE FILTER
2.
4.
6.
2
4
6
00033-gb.fm5 Page 116 Thursday, May 11, 2000 4:52 PM
