7
WASHING PROGRAMME
Selecting the programme:
1.
Plug in the appliance.
2.
Turn on the water supply tap.
3.
Set the
Programme Selector
knob to the desired programme.
4.
Select additional
options
, if desired, pressing the corresponding button.The indicator lights up.
By pressing the button once more, this option can be turned off again.
5.
Press the
Start/Pause
button.
The indicator light will come on and the programme duration is shown on the display (if available).
The indicator lamps show the sequence reached in the programme. After starting the programme, the
sequence indication runs from left to right through Wash, Rinse, Spin.
When the sequence of the programme is finished the corresponding lamp goes out.
Options
(depending on model)
Easy Ironing
Can be used together with Cotton and Synthetics programmes to make ironing easier.
Increases the water quantity and the clothes are spun very gently.
Energy save/
Eco
Increases the programme time and reduces the temperature. This reduces energy
consumption by about 30% without compromising the excellent results of the wash.
Prewash
Only for heavily soiled loads (for example sand, granular dirt).
The cycle time increases approximately 15 min.
Quick wash /
Rapid
Select for quick, economical washes.
Especially suitable for small, lightly soiled loads.
Note:
If Quick wash is selected, only the Rinse Hold and Spin speed reduction
options can be activated.
Intensive
Rinse
More water and a longer time in rinse cycle is added.
The intensive rinse function is especially suitable for areas with particularly soft
water, for baby clothes and to help people with allergies.
Rinse hold /
Spin delay
The laundry remains in the last rinse water without being spun, to avoid heavy creasing.
Especially suitable for the Synthetics or Delicates programmes, if the laundry
is not to be unloaded immediately after the end of the programme. This function
is particularly useful if you want to postpone spinning to a later time or when you
do not wish to spin the clothes.
Note:
The programme stops to Rinse Hold at the time the Rinse Hold light in the
programme flow indication is on.
Continuing wash cycle after rinse hold:
Press the Rinse hold button again; the load will be spun according to the selected
programme.
If you do not wish to spin the clothes, turn the programme selector knob to the
drain programme and press the
Start/Pause
button
Spin speed
reduction
Press this button to reduce the predetermined automatic maximum spin speed. In
some programmes the maximum final spin speed is limited to go easy on your
laundry items. Selection of a higher spin speed is not possible.
With the "Cotton" and "Synthetics" programmes a short spin cycle is provided in
any case, even if the exclusion has been selected, in order to optimize rinsing
results.
If the spin speed 0 is selected, the final spinning is cancelled.
The water is drained out only.
3gb05149.fm5 Page 7 Wednesday, February 14, 2001 9:18 AM
Black Process Plate
