17
DRAIN HOSE
• Drain hose connection to water outlet.
1. Unhook the drain hose from the left clip;
see arrowA in Fig. 1.
Important:
Do NOT loosen the drain hose connection;
see arrow B in Fig. 1, otherwise there is the risk of
leakage (danger of scalding with hot water).
2. Fit the drain hose either to the siphon or hook it
over the edge of a sink or bath tub with the “U”
bend (Fig. 1). Small hand basins are not suitable.
3. Minimum drain height: 70cm.
Maximum U-bend drain height: 125cm.
4. If you need to add an extension, use a flexible
hose of the same type and secure the union with
screw-on hose clips. Maximum overall drain hose
length 2.5m.
Important:
Make sure that there are no kinks in the drain hose run
and take precautions against it falling while the
appliance is running (Fig. 2).
CONNECTION TO THE MAINS
• Observe local utility company regulations.
• The connection must be made with a correctly
installed, earthed and insulated socket.
• The system must be earthed.
The manufacturer declines all responsibility for
injury to persons or pets and damage to property
caused by disregarding the above instructions.
• The data concerning voltage, consumption and
necessary fuse are supplied on the inside of the
appliance door.
• The mains connection cable may only be replaced
by a qualified electrician.
• The appliance conforms to European safety
regulations, ECdirective93/68/EWG and
EN60555.
• Do not use extension leads or multiplugs.
INSTALLATION INSTRUCTIONS
Min 70 cm
Max 125 cm
Fig. 1
Fig. 2
