45
FILLING THE DETERGENT AND
ADDITIVES
1.
Pull out the detergent drawer. The drawer will
have three or four chambers depending on
the model.
2.
Filling the detergent:
•
Programmes with pre-
and main wash.
•
Main wash programme
without prewash.
When using liquid detergent, extract
the coloured insert from the drawer
and put it in the compartment .
The insert has a scale to make dosing
easier.
•
Add fabric softeners and conditioners
- no further than the “Max” mark
(three chamber models) or the
“100 ml” mark (four chamber models).
•
Fill chlorine bleach only to the “Max”
mark (if model is suited to its use).
•
Stain remover.
•
Water softener
(water hardness class 4).
•
Starch (diluted in water).
In this case select the programme
“Rinse and Spin”.
After pouring the starch fill about
1 litre of water into chamber.
3.
Slide the drawer in until it clicks shut.
Notes:
•
When using highly concentrated detergents,
use the detergent ball provided with the
detergent and place it directly in the drum to
avoid dispensing problems (for programmes
without pre-wash only).
•
For programmes with prewash: liquid
detergents can be used for the prewash.
For the main wash then a powder detergent
has to be used.
•
Dose the correct amount of concentrated
fabric softener and dilute with water up to the
maximum level marked in the softener
compartment.
Dyeing: Commercially available products usually
consist of a dye colour, fixing agent and salt.
Pour the dye colour, fixing agent and salt directly
into the empty drum, and only then load the
laundry.
•
Only use products designed for use in
washing machines.
•
Follow the manufacturer's instructions.
•
Plastic and rubber components of the
machine can be stained by dyes or bleaches.
DETERGENT AND ADDITIVES
Detergent drawer with 3 chambers
Detergent drawer with 4 chambers
DYEING AND BLEACHING
