EN
7
Wash options
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum
will rotate slowly; the Easy Iron and START/PAUSE
indicator lights will flash. To end the cycle press the
START/PAUSE button or the Easy Iron button.
For the Silk
wash cycle, the machine will end the
cycle while the laundry is soaking and the Easy Iron
indicator light will flash. To drain the water so that the
laundry may be removed, press the START/PAUSE
button or the Easy Iron button.
It cannot be used in conjunction with
, , , , , .
Steam Hygiene
This option enhances washing performance by
generating steam during the wash cycle that eliminates
any bacteria from fibres while treating them at the same
time. Place the laundry in the drum, choose a
compatible programme and select option "
".
The steam generated during washing machine
operation may cause the porthole door to become hazy.
It cannot be used in conjunction with , (90°C), ,
, , , , , , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by 30%-50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
It cannot be used in conjunction with
, , , ,
, , , , , .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is
used with a full load of washing, or when a large amount
of detergent is required.
It cannot be used in conjunction with
, , , .
Wash cycles and options
Table of wash cycles
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this
value will then be shown on the display.
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle
with a temperature of
60°C and 40°C
.
2) Long wash cycle for cottons: set wash cycle
with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle
with a temperature of 40°C.
(*) The duration of the wash cycles can be checked
on the display.
Icon Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Cycle
duration
Detergent
for prewash
Detergent
for wash
Fabric
softener
Cottons wash cycles
Cotton
with pre-wash
(Add detergent to the relevant compartment).
90° 1200
lll
8
Cotton (1): heavily soiled whites and resistant colours.
60°
(Max. 90°)
1200 -
ll
8
Cotton (1-2): heavily soiled whites and delicate colours.
40° 1200 -
ll
8
Coloured Cotton (3) 40° 1200 -
ll
8
Shirts
40° 600 -
ll
2
Jeans
40° 800 -
ll
4
Special programmes
Baby: heavily soiled delicate colours
40° 800 -
ll
4
Durable Synthetics 60° 800 -
ll
4
* Steam Refresh (see previous page)
- - - - - 1,5
"Bed & Bath" for bedlinen and towels.
60° 1200 -
ll
8
Duvets: for down-stuffed garments.
30° 1000 -
ll
3,5
Silk: for garments in silk and viscose, lingerie.
30° 0 -
ll
2
Wool: for wool, cashmere, etc.
40° 600 -
ll
2
Mix 30':
to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand)
30° 800 -
ll
3,5
Partials wash cycles
Rinse - 1200 - -
l
8
Spin - 1200 - - - 8
Drain - 0 - - - 8
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can
vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any
wash options selected.
