EN
5
LOADING THE RACKS
CUTLERY RACK
The third rack was designed to house
the cutlery. Arrange the cutlery as
shown in the gure. A separate arran-
gement of the cutlery makes collec-
tion easier after washing and improves
washing and drying
performance.
Knives and other utensils with sharp
edges must be positioned with the
blades facing downwards.
UPPER RACK
Load delicate and light dishes: glasses,
cups, saucers, low salad bowls.
The upper rack has tip-up supports
which can be used in a vertical
position when arranging tea/ dessert
saucers or in a lower position to load
bowls and food containers.
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper basket can be adjusted:
high position to place bulky crockery in the
lower basket and low position to make the most
of the tip-up compartments by creating more
space upwards.
The upper rack is equipped with a Upper Rack
height adjuster (see gure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers (A) at the sides of the rack and move
the basket downwards.
We strongly recommend that you do not adjust the height of the
rack when it is loaded.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable aps can be
positioned at three dierent
heights to optimize the arrange-
ment of crockery inside the rack.
Wine glasses can be placed
safely in the foldable aps by
inserting the stem of each glass
into the corresponding slots.
For optimum drying results incli-
ne the foldable aps more. To
change the inclination, pull up
the foldable ap, slide it slightly
and position it as you wish.
LOWER RACK
For pots, lids, plates, salad bowls, cu-
tlery etc.... Large plates and lids should
ideally be placed at the sides to avoid
interferences with the spray arm.
The lower rack has tip-up supports
which can be used in a vertical position
when arranging plates or in a horizon-
tal position (lower) to load pans and
salad bowls easily.
(loading example for the lower rack)
POWER CLEAN®
Power Clean® uses the special water jets in
the rear of cavity to wash more intensively
the high dirty items. The lower rack has a
Power Clean support, a special pull-out
support in the rear of the rack that can be
used to support frying pans or baking pans
in upright position, thus taking up less space.
Placing the pots/casseroles faced to the Power Clean® component
please activate the POWER CLEAN® on the panel.
How to use Power Clean®:
1. Adjust the Power Clean® area G
folding down the rear plate
holders to load pots.
2. Load pots and casseroles
inclined vertically in Power
Clean® area. Pots have to be
inclined towards the power
water jets.
