Produits de la Marque Whirlpool

Start-up and use

Starting the dishwasher

1.Turnthewatertapon.

2.OpenthedoorandpresstheON/OFFbutton:youwillheara

short beep and the display and option indicator lights switch on.

3. Measure out the detergent

(see below).

4. Load the racks

(see Loading the racks).

5. Select the wash cycle in accordance with the type of crockery

and its soil level

(see Table of wash cycles)

, by pressing the

P button.

6. Select the wash options

(see adjacent information).

7. Start the wash cycle by shutting the door: a long beep signals

the start of the wash cycle.

8. Two short beeps and one long one indicate the end of the

wash cycle and the wash cycle number flashes on the display.

Openthedoor,switchofftheappliancebypressingtheON/

OFF button, shut off the water tap and unplug the appliance

from the electricity socket.

9.Waitforafewminutesbeforeremovingthecrockery,inorder

to avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during

certain periods of inactivity, in order to minimise

electricity consumption.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce the

amount of detergent used accordingly.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process

it is possible to change the cycle, provided that it has only just

begun: open the door, avoiding the escaping steam, and press

andholdtheON/OFFbutton;themachinewillswitchoffwith

alongbeep.SwitchthemachinebackonusingtheON/OFF

button and select the new wash cycle and any options desired;

start the cycle by closing the door.

Adding extra crockery

Withoutswitchingoffthemachine,openthedoor,takingcare

to avoid the escaping steam, and place the crockery inside the

dishwasher. Close the door: the cycle starts from the point at

which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. It starts again from the point at which it was

interrupted once the door has been shut or once the electricity

supply is restored.

Measuring out the detergent

A good wash result also depends on the correct amount of

detergent being used; exceeding the stated amount does not

result in a more effective wash and increases environmental

pollution.

Only use detergent which has been specifically

designed for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam

residue remaining in the machine after the cycle has

ended.

The use of tablets is only recommended for models

which offer the MULTI-FUNCTIONAL TABLETS option.

To achieve the best results from each washing and

drying cycle, powder detergent, rinse aid liquid and

salt should be used.

Compartment A:Washingdetergent

Compartment B: Pre-wash detergent

1. Open cover C bypressing

button D.

2. Pour in the detergentafter

consulting the Table of wash

cycles:

• For powder detergent use

compartments A and B.

• For detergent intablet form:

whenthecyclerequires1tablet,

place it in compartment A and

closethecover;whenitrequires2,

place the second tablet at the bottom of the appliance.

3. Remove detergent residues from the edges of the

compartment and close the cover until it clicks.

* Only available in selected models.