24
Options and display description
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK
REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT
CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30
SECONDS IF NO CYCLE HAS STARTED.
1.
2.
3.
1/2 LOAD BUTTON
Half load cycle can be used for the upper or lower
rack.
Select the required program then press the “Half
Load” button - the light comes on.
Turns off at the end of the program.
The “Half Load” option can be used with the
programs indicated in the table of programs.
4.
TABLET SETTING
This setting allows to optimize the cycle
performances according the type of detergent used.
Push the Tablet button for 3 seconds (until the
indicator lights up) if you are using the combined
detergents in tablet (rinse aid, salt and detergent in
1 dose). If you are using powder detergent or gel
detergent, the Tablet indicator on the control panel
has to be off.
5.
DELAYED START BUTTON
The wash cycle can be programmed to start
after 2, 4 or 8 hours.
Then press the Start button.
The wash program will start after the set time.
SALT INDICATOR
When lit (at the end of the cycle), the salt reservoir
needs to be refilled.
RINSE AID INDICATOR
When lit (at the end of the cycle), the rinse aid
dispenser needs to be refilled.
