17
Wash Cycle Table
NOTE
•
Meaning: need to fill rinse into the Rinse-Aid
Dispenser.
• * This programme is the test cycle. The
information for comparability test in accordance
with EN 50242, as follows:
• Capacity: 9 setting;
• Position Upper basket: upper wheels on rails;
• Rinse aid setting: 6;
• Pl: 0.49w;
• Po: 0.45w.
STARTING A WASHING PROGRAMME
Program
Cycle selection
information
Description
of cycle
Detergent
pre/main
Running
time (min)
Energy
(Kwh)
Water
(l)
Rinse
Aid
Intensive
For heaviest soiled crockery,
and normally soiled pots
pans dishes etc with dried
on soiling.
Pre-wash (50°C)
Wash (65°C)
Rinse
Rinse
Rinse (65°C)
Drying
5/22g
(or 3in1)
135 1.3 16
Normal
For normally soiled loads,
such as pots plates glasses
and lightly soiled pans.
Pre-wash (45°C)
Wash (55°C)
Rinse
Rinse (65°C)
Drying
5/22g
(or 3in1)
155 1.07 13
* EN 50242
This is standard programme,
it is suitable to clean
normally soiled tableware
and it is the most efficient
programme in terms of its
combined energy and water
consumption for that type of
tableware.
Pre-wash
Wash (50°C)
Rinse (60°C)
Drying
5/22g
(or 3in1)
175 0.78 9.0
Glass
For lightly soiled crockery
and glass
Pre-wash
Wash (40°C)
Rinse
Rinse (60°C)
Drying
5/22g 110 0.7 13
1 Hour
For lightly soiled loads that
just need a basic drying.
Pre-wash (50°C)
Wash(60°C)
Rinse (55°C)
Drying
5/22g 60 0.85 9
Rapid
A shorter wash for lightly
soiled loads that do not
need drying.
Wash (40°C)
Rinse
Rinse (45°C)
20g 40 0.45 10
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled “Loading
the Dishwasher”).
2. Pour in the detergent (see the section entitled “Salt, Detergent and Rinse Aid”).
3. Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the
socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4. Close the door, press the ON/OFF Button, and the display will turn on.
5. Press the program button , you can select your desired program. If a program is selected, the response
icon will light. Then press the Start/Pause button, the dishwasher begins to start.
