USING YOUR DISHWASHER
Cycle
A shows what steps are in each cycle
Wash
Rinse
Main
Wash Rinse
Rinse
Dry
Cycle
Time
(Minutes)
China Crystal
A light wash with a
gentle dry designed for
china and crystal.
NOTE: The Cycle Control knob
does not move while the dishwasher
heats water to 135°F (57°C) in the
final rinse (marked t) if the Lo-Energy
Rinse option is not selected. If the Hi-
Temp Wash option is selected
water will also be heated in the main
wash (marked ft)- See pages 10 and 11.
•tt
60*
Rinse & Hold
For rinsing a few items
to be washed one or
more days later. Do not
use detergent. Use Air Dry option.
Drying with heat may cause food to
bake on dishes.
16
* Cycle time includes heated dry time. Cycle time may vary depending on the temperature of
the water entering the dishwasher.
What happens in each option
A note about water heating
The dishwasher can heat water during
portions of all cycles except Rinse & Hold.
NOTE:
• The WATER HEATING signal light will
glow while the water is heating.
• The Cycle Control knob does not move
while the water is heating.
• When the water temperature reaches
135°F (57°C), the Cycle Control knob will
begin moving again.
• The heating time is based on the tempera
ture of the water supply as it enters the
dishwasher. The cooler the water, the
longer the heating time.
If water temperature at the faucet is
below 120°F (49°C), have a qualified
person raise the water heater^s thermostat
setting. See page 16.
10
• The dishwasher does not pause to heat
the water if the water entering the dish
washer is already 135°F (57°C).
