TD-8840T ADSL2+ Modem Router User Guide
23
4.4 Advanced Setup
Choose “Advanced Setup”, you can see the next submenus:
Figure 4-12
Click any of them, and you will be able to configure the corresponding function.
4.4.1 Routing
Choose “Advanced Setup→Routing” menu, and you will see the routing information in the next
screen (shown in Figure 4-13).
Figure 4-13
Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-14).
Figure 4-14
¾ Destination IP Address: This parameter specifies the IP network address of the final
destination.
¾ IP Subnet Mask: Enter the subnet mask for this destination.
¾ Gateway IP Address: Enter the IP address of the gateway. The gateway is an immediate
neighbor of your ADSL Router that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your Router; over Internet (WAN), the
gateway must be the IP address of one of the remote nodes.
