14
Adding channels to the TV’s memory
When you press Channel ▲ / ▼ on the TV or CH ▲ / ▼ on the remote
control, your TV will stop only on the channels you have programmed into
the TV’s channel memory. Follow the steps below to program channels
into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them
in its memory. After the TV has stored the channels in its memory
automatically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
or to display the SETUP menu.
2. Press
or until the TV/CABLE
selection is highlighted.
3. Press
or to select either TV or
CABLE, depending on which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
until the CH PROGRAM selection
is highlighted.
5. Press
to start channel
programming.
The
TV will automatically
cycle through all the
TV or Cable channels
(depending on which
you selected), and store
all active channels in the channel memory.
6. When channel programming is complete, the message
“COMPLETED” appears.
7. Press CH ▲ or ▼ to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specifi c channels manually.
To add or erase channels manually (analog mode):
1. Press ANALOG/DIGITAL to select the analog mode.
2. Press MENU then press
or to display the OPTION menu.
3. Press
or until the ADD/ERASE selection is highlighted.
4. Press
to display the ADD/ERASE menu.
5. Select the desired channel to be
memorized or deleted using
or .
Press
or to select either ADD or
ERASE.
6. Repeat step 5 for other channels you
want to add or erase.
7.
Press MENU repeatedly until the menu
screen is cleared.
Note: To return to normal viewing immediately, press EXIT.
MENU
CH
Note:
If the desired channel is not stored in the
channel memory, add the channel manually
(see “Adding and erasing channels manually,”
below).
EXIT
LANGUAGE /
IDIOMA / LANGUE
CLOCK SET
TV/CABLE CABLE
CH PROGRAM
/ / / /MENU
LANGUAGE /
IDIOMA / LANGUE
CLOCK SET
TV/CABLE CABLE
CH PROGRAM
/ / /MENU
CH PROGRAM
ANALOG CH SEARCH
STOP : MENU
CH PROGRAM
DIGITAL CH SEARCH
STOP : MENU
Analog tuning
Digital tuning
ADD / ERASE
SAP OFF
CLOSED CAPTION
V-CHIP
AUTO SHUT OFF OFF
/ / /MENU
ADD / ERASE
ANALOG
CH
001 ERASE
002 ADD
003 ERASE
004 ADD
/ / / / ENTER
Setting up
your TV
ANALOG/
DIGITAL
30K-01(B)_EN.indb 1430K-01(B)_EN.indb 14 9/3/2550 16:40:599/3/2550 16:40:59
