4-2. Insert the stripped cable end into the terminal and tighten the terminal screw with a screwdriver.
Note
If not making bridge connections,
be sure to tighten unused terminal
screws to avoid their vibration.
8
[Hanging from a ceiling suspension pipe]
Step 4. Connect the speaker cable to the removable input connector.
Tip
The following matching cable types are recommended:
• Solid copper wire: ø0.5 – ø1.6 mm (equivalent to AWG 24 – 14)
• Stranded copper wire: 0.2 – 2.5 mm
2
(equivalent to AWG 24 – 14)
4-1. Detach the removable input connector from the
speaker's wiring socket, and loosen the screw of the
terminal to be used.
