
VPCL1 Series Hard Disk Drive
Replacement Instructions
P/N 989200672 Rev. A 3/4
Step 12. All (4) screws and bracket
should now be removed from old HDD.
Step 13.
After the HDD is completely
removed from bracket, identify the (2)
screws with springs.
Step 14. Remove the (2) screws to be
used on new HDD.
Step 15. Both screws should now be
removed.
Step 16. Re-install the (2) screws with
springs previously removed.
Step 17. Place the HDD bracket over the
new HDD.
NOTE! Proper mounting of
HDD bracket can be verified with
the HDD connectors appearing
opposite the bracket tabs.
Black connector on left, Blue on
right.
Step 19. Connect the cables previously
disconnected.
Re-install the (2) screws with
springs previously removed.
HDD ASSEMBLY 16-18 STEPS