54
Transportation, e.g. if moving house
Preparatory work
1.
Turn off the tap.
2.
Release the water pressure in the supply hose. Maintenance
– Filter in the water inlet hose ~ Page 35
3.
Drain any residual detergent solution. Maintenance – Drain
pump blocked
4.
Isolate the washing machine from the power supply.
5.
Remove the hoses.
Installing transportation protection devices
1.
Remove covers and keep in a safe place.
If required, use a screwdriver.
2.
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
bolts.
Before switching on the appliance:
²
– Remove the transportation protection devices! ~ Page 46
– To prevent unused detergent from flowing into the outlet
during the next wash: Pour 1 litre of water into dispenser II
and start the Drain programme.
Installing transportation protection devices
www.devicemanuals.eu
Installing transportation protection devices
Remove covers and keep in a safe place.
www.devicemanuals.eu
Remove covers and keep in a safe place.
If required, use a screwdriver.
www.devicemanuals.eu
If required, use a screwdriver.
Insert all 4 sleeves.
www.devicemanuals.eu
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
www.devicemanuals.eu
Clamp mains cable on the holders. Insert and tighten the
bolts.
www.devicemanuals.eu
bolts.
