ST700 GENERAL HANDBOOK
667/HB/27880/000 Page 76 Issue 8
5.19 FITTING THE ST700 RACK ASSEMBLY INTO ALTERNATIVE CABINETS
DISCONNECT ALL POWER TO THE CABINET BEFORE REMOVING OR
INSTALLING ANY EQUIPMENT INTO THE CABINET.
The ST700 Rack Assembly may be fitted into enclosures other than the ST700
Cabinet Assembly. In the UK, the Cabinet must be one that has previously been
approved with a different controller. Some examples are:
ST800
T200
T400S
T400L
GEC110/125
CST – McQue
T110
T500P
GEC125 in 25 Case
Microsense Midi
The procedure for each type of Cabinet depends largely on the type and condition of
the existing equipment. For this reason it is not possible to define in detail exactly
what should be undertaken, but generally the procedure follows that defined in
sections 5.1 to 5.16.
For some Cabinets, conversion kits of parts are available. These provide brackets
and other equipment that may be helpful during the installation. Part numbers for the
spares available at the time of issue of this handbook are listed in Appendix A.
5.20 COMMON RETURNS FOR PUSH BUTTON
For the connections for the common returns see the following drawings :-
ST700S - 667/CC/29000/001
ST700/400S - 667/CC/29000/002
ST700L - 667/CC/29000/003
5.21 COMMON RETURNS FOR DETECTORS
For the connections for the common returns see the following drawings :-
ST700S - 667/CC/29000/001
ST700/400S - 667/CC/29000/002
ST700L - 667/CC/29000/003
