10 At the confirmation message, select [Y].
The operations of reinstallation for the hard disk start au
tomatically. (The operations take about 15 minutes.)
When the message “insert the next CD” is displayed, in
sert the Product Recovery CD-ROM showing the next
number in the sequence, and then select [OK],
XnËë>
If the message “The media does not contain the cor
rect file” appears, select [OK]. The message “insert
the next CD” will be displayed again.
Confirm that the proper Product Recovery CD-ROM
has been inserted by opening the tray of the CD drive
and then close the tray, then select [OK].
11 After the reinstallation procedure completes, the follow
ing message will appear on the display.
«iMEMiMil ______________________
Windows(R) 2000 Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart Ihe computer by pressing
Ctrl + Alt + Del (Delete),
Windows(R) XP Professional install wizard will start after reboot.
Remove the Product Recovery CD-ROM, then restart the computer by pressing
Ctrl + Alt + Del (Delete),
Remove the Product Recovery CD-ROM, then restart the
computer by pressing fCtrn + fÂÏTl+rDër).
12 When the message [Press F2 to enter SETUP] is displayed,
press ( F2 ) and then run the Setup Utility.
If the password has been set, enter the Supervisor Pass
word.
____
13 Press ( F9 ).
At the confirmation message, select [Yes] and press
( Enter ). (The Setup Utility settings will return to their
default values. Even the security settings with the excep
tion of the password(s) will return to their default values.)
Change the settings where necessary.
14 Press C F10 ).
At the confirmation message, select [Yes] and press
( Enter ).
15 Perform the setup procedure for Windows by following
the instructions on the screen. ((3^ * 0
<Changing the drive letter>
You can change the drive letter for the CD drive or hard disk
drive by the following steps.
• Drive letters can only be changed when two or more parti
tions have been created on the hard disk drive. The name
of the C: drive cannot be changed.
• We recommend that you make these changes before in
stalling applications.
1 Select [Start] - [Settings] - [Control Panel] - [Administra
tive Tools] - [Computer Management].
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Path].
4 Select [Edit].
5 Select [Assign a drive letter] and the new drive letter, and
then select [OK].
6 At the confirmation message, select [Yes],
1 Select [start] - [Control Panel] - [Performance and Main
tenance] - [Administrative Tools] - [Computer Manage
ment] .
2 Select [Disk Management] from [Storage].
3 Right click on the partition of the hard disk or the name of
the CD drive and select [Change Drive Letter and Paths].
4 Select [Change].
5 Select [Assign the following drive letter] and the new drive
letter, and then select [OK].
6 At the confirmation message, select [Yes].
A note)-
When the FIRSTAID FD is to be created, follow the steps
in the readme.txt on the disk. ((3^ *2)
25
