First-time Operation
Latches
Read the steps below to help you learn what parts are included, and to gain an understanding of
some basic computer-related operations.
1
Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or is not working properly, contact Panasonic Technical Support.
AC Adapter
.................................
1
AC Cord..............................
.
.......
1
CF-AA1639
Battery Pack
...............................
1
Modem Telephone Cable...........1
O
CF-VZSU14
Operating
Instructions
........
1
(This book)
Windows®
Book
......................
1
Product Recovery
CD-ROM
.................
1
2 Write down the Product ID
The Product ID is necessary during the setup procedure for Windows (Q= pages
11,21). Record the number shown on the “Certificate of Authenticity’* located on
the bottom of the computer in the “Customer’s Record’* section on page 2 of this
manual.
3 Read the LIMITED USE LICENSE AGREEMENT (o-page 22)
Before removing the seal covering the power switch, read the LIMITED USE LICENSE
AGREEMENT.
4 Connect the battery pack
© Turn your computer over.
@ While sliding and holding the latches in the outward positions, slide the cover to
open it.
(3) Use the blue tab to lower the battery pack into place.
r
• Be sure the battery pack is properly connected to the connector.
• Do not touch the battery connector on the computer. The computer may not
operate properly.
