7
Touch Pad
Use the touch pad to move the cursor on the display and perform normal computer
operations.
NOTE
● By design the touch pad is to be used with a finger tip only. Therefore, do not use
any implement which causes damage on the work surface.
A.Work Surface (Touch Pad)
B.Left Button
C.Right Button
NOTE
●
Refer to [Mouse Properties]* for information on basic operations other than the above.
*
Windows 2000 : Select [Start] - [Settings] - [Control Panel] - [Mouse].
Windows XP : Select [start] - [Control Panel] - [Printers and Other Hardware] -
[Mouse].
● The help message in [Settings] for [Mouse Properties] - [Device Settings] will be
displayed in the same language as the one set for [Control Panel] - [Date, Time,
Language, and Regional Options] - [Regional and Language Options] - [Standards
and formats].
Function Operation
Moving the Cursor
Move the tip of your finger lightly over the
work surface.
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll
page 8
tapping or clicking
double-tapping or double-clicking
Two quick taps, but
on the second tap
leaving your finger
down (applying
pressure) and mov-
ing it on the work
surface.
While holding down
the button, moving
your finger on the
work surface.
or
