Touch Pad (Basic Operation)
Work Surface
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to operate, refer to "Touch Pad (Advanced)".
Xnote>
The touch pad has been designed to work only when a finger is used. Therefore, do not use
any implement on the touch pad.
Basic-Operation-,
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
]double-ciidqng
or
Two quick taps, but on
the second tap leaving
your finger down (apply
ing pressure) and moving
it on the work surface.
While holding down the
button, moving your fìn
ger on the work surface.
rHandling-the-Touch-Pad-i
• Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pens).
• Do not allow things that could dirty the touch pad, such as oil. The cursor may not work
properly in such cases.
• When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first applied
with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
17
