Super Quick
Short cycle for lightly soiled items or for
laundry which needs only freshening up.
We recommend you to reduce the fabrics
loading.
Prewash
By selecting this option the machine per-
forms a prewash cycle before the main
wash phase. The washing time will be pro-
longed. This option is recommended for
heavily soiled laundry.
Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In
this way ironing is easier. Furthermore the
machine will perform some additional rinses
in some programmes. On cotton pro-
grammes the maximum spin speed is re-
duced automatically.
Extra Rinse
This appliance is designed to save energy.
If it necessary to rinse the laundry using an
extra quantity of water (extra rinse), select
this option. Some additional rinses will be
performed. This option is recommended for
people who are allergic to detergents, and
in areas where the water is very soft.
Start Pause
This button allows you to start or to inter-
rupt the selected programme.
Delay Start
The programme can be delayed from 30
min - 60 min - 90 min, 2 hours and then by
1 hour up to a maximum of 20 hours by
means of this button.
Door locked pilot light
The pilot light 9 illuminates when the pro-
gramme starts and indicates if the door can
be opened:
• light on: the door cannot be opened. The
machine in working or has stopped with
water left in the tub.
• light off: the door can be opened. The
programme is finished or the water has
been emptied out.
• light flashing: the door is opening.
Display (10)
10.1 10.2
The display shows the following informa-
tion:
10.1: Child safety lock
This device permits you to leave the appli-
ance unattended during it's functioning.
10.2:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample
). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
•
Delayed start
The Selected delay set by pressing the
relevant button appears on the display for
a few seconds, then the duration of the
selected programme is displayed again.
The delay time value decreases by one
unit every hour and then, when 1 hour re-
mains, every minute.
•
Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for exam-
ple
(see paragraph «What to do
if...»).
•
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom
of the display for a few seconds. The in-
tegrated red light of button 7 starts flash-
ing.
•
End of programme
When the programme has finished the
flashing zero (
) is displayed. The pilot
light 9 and the pilot light of button 7 go
out. The door can be opened.
8
