98
Appendix H: Cabinet Separation for Model WS-65713,
WS-73513, WS-73713
For Mitsubishi Dealers and Service
Personnel Only
The Mitsubishi TV models WS-65713, WS-73513 and
WS-73713 cabinets are assembled in two pieces. These
pieces may be separated to allow for easier delivery
and set up. The instructions below show how to safely
separate and reattach the cabinet. This TV weighs over
320 lbs and has many sensative components. This
dismantling procedure should be done by authorized
Mitsubishi Dealers or Service Personnel only.
The following steps should be performed by two people:
1. Remove the decorative Plastic Covers (2) on each side
of the cabinet and then remove the exposed Screws (2)
on each side.
2. Carefully lift the Cabinet-Top straight up until the
Brackets are clear from the Cabinet-Bottom.
3. Carefully place the Cabinet-Top on the floor.
4. Once you have moved and positioned the Cabinet-
Bottom to its desired location, reverse the procedure
and mount the Cabinet-Top on the Cabinet-Bottom.
Be sure you align the Brackets properly. Keep
fingers clear of all joints! Replace the screws and the
decorative Plastic Covers.
1
2
3
4
