Labwashers should undergo routine
maintenance by the Miele Technical
Service every 1000 operating hours
or at least once every 6 months.
Maintenance covers the following:
–
Electrical safety
–
Door mechanism and door seal
–
Screws and connections in the wash
cabinet
–
Water inlet and drain
–
Internal and external dispensing
systems
– Spray arms
– Triple filter system
– Drain pump and non-return valve
– Steam condensor
– All mobile units, baskets, and inserts
If applicable:
– Drying unit
–
Connected printer
Also during maintenance, the following
function checks are conducted:
–
a test program is run
–
wash temperatures are measured
–
ensure a water tight door seal
–
all safety-relevant measuring
systems are checked (fault display).
Maintenance
39
