Options
52
EcoStart
The EcoStart function
allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option, you must set up to three
electricity rate time zones (see "Settings
menu - EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the cheapest rate zone within the
time set.
Use the arr
ow buttons to set the
hour and confirm with
OK.
The hour will be saved and the minute
number block will
be highlighted.
Use the arr
ow sensors to set the
minutes and confirm with
OK.
The estimated start time of the program
select
ed will appear in the display.
The and
Start indicat
or lights will
light up.
The program selected will start auto‐
matically in the cheapest time zone and
will fini
sh at the latest at the finish time
set.
The time remaining will appear in the
display, the indicator light will go out
and the indicator light for the program
selected will light up.
Changing or deleting set times
You can change the set times or the
pr
ogram before the start time in the dis‐
play is reached.
P
ress the button.
Use the arr
ow buttons to select
the setting you want to change and
confirm with
OK.
Use the arr
ow buttons to select
the Change or Delete function and
confirm with
OK.
After confirming the Change function,
you can change the set time.
After confirming the Delete function, the
pr
ogram duration will appear in the dis‐
play and the program will start.
The indicator light will go out and the
Start indicat
or light will light up.
If you open and close the door again
befor
e the start time is reached, the
message Continue with Start will appear
in the display. Press the
Start
button
to restart the FlexiTimer.
