www.bhphotovideo.com
420
PRO AUDIO
Channel Strips / Mic Preamps
• Classic analog sound • 15Hz-70kHz frequency response
• Variable 10dB to 60dB Gain range
• Optical and Coaxial SPDIF digital connectors
• A/D interface with a Word Clock I/O, AES/EBU
• Fast aggressive optical compressor
• Musical EQ for tone control • Large backlit VU meter
#JOONEQ .................................................. Call or Log-on
JoemeeK
oNEq
The JOEMEEK OneQ is a single-channel microphone preamp and
channel-strip processor combining a 4-band parametric EQ, an
optical compressor, a de-esser and an Enhancer, housed in a solid
2RU chassis. The JOE MEEK sound, particularly the compressor, is
often characterized as “fat,” “aggressive,” “punchy,” and “tube-like:”
if you’d like to add some old-school analog beef to your digital tracks,
the OneQ delivers.
• 10Hz–200kHz frequency response
• 60dB Gain Range • Latency-free monitoring
• 24-bit A/D converter, Word Clock I/O
• Selectable sample rates to 192kHz
• Out Switch removes unused compressor and EQ from signal
• “Air” function for greater HF openness
#FOTTP .............................................................Call or Log-on
The Twin Trak Pro is a 2-channel microphone preamplier
equipped with a dual-mono/stereo optical compressor and an
EQ section consisting of a High-pass Filter and a Mid-scoop.
The unit represents an affordable way to bring some Focusrite
class to project studio tracking, Features such as front panel
XLR and 1/4” connectors, attractive metering, and variable input
impedance allow for quick setup and creative ow when the
mood strikes.
FocusRiTe
TWIN TRAK PRo
• Tube mic pre • XLR and 1/4” mic and Hi-Z inputs
• AES/EBU , RCA SPDIF digital outs
• 10Hz-75kHz frequency response • 60dB maximum Gain
• Selectable sampling and bit rates • BNC Word Clock I/O
• Selectable dither and noise-shaping algorithms
#DB376 .............................................................Call or Log-on
dBX
376
The 376 from DBX is a channel strip featuring a single-channel
tube microphone preamp, 3-band parametric EQ, a compressor
and a de-esser, housed in a 1RU steel chassis. The 376 includes
an A/D converter with selectable sampling and bit rates,
supporting AES/EBU and SPDIF digital formats, and a Word
Clock I/O. Flexible and warm-sounding, the 376 is a good value.
• Low-cost tube mic pre with readily available 12AX7 tube
• XLR and TRS phone inputs, outputs, &insert
• High-pass lter • 20Hz-20kHz frequency response
• 72dB Gain range
• Tube Drive controls tube presence in signal path
• Buffering for Hi-Z in avoids pickup loading for guitars, basses
#STVTB1 ..................................................................... $139.99
sTudio PRoJecTs
VTB1
The VTB-1 is a single-channel tube
microphone preamplier and DI, designed as a low-cost
alternative for project studio owners and voiceover artists
desiring the tube sound. The unit features a Tube Drive control
knob that attenuates or increases the amount of tube circuitry
in the signal path according to taste, delivering both solid state
transparency and tube thickness.
The Octane is a highly exible preamplier interface ideal for anyone
using ADAT inputs. It features eight channels of dynamic low-noise,
high-gain pre-amplication on balanced XLR, TRS, or high-impedance
instrument-level inputs. Each channel provides a separate microphone
level, 20dB pad, and three segment LED meter, with output connections
being made via balanced/unbalanced 1/4” line or ADAT lightpipe.
m-audio
oCTANE
• Low-noise, high-gain 8-channel microphone/instrument
preamp • (8) XLR, 1/4” balanced/unbalanced inputs
• (2) Hi-Z (guitar) instrument inputs on channels 1-2
• ADAT lightpipe, 1/4” direct outs
• Word clock I/O • 24-bit A/D
#MAOQ ................................................................$599.00
m-audio DMP3
The DMP3 is an ideal two-channel microphone/instrument
pre-amplier for high resolution recordings. Its exceptional 20Hz
to 80kHz dynamic range is complemented by an unbelievable
66dB of gain, VU meters and phantom power for condenser
microphones. Every nuance of your sound source will be
recorded with minimal noise or degradation improving overall
recording quality.
• 2-channel mic/instrument pre-amp
• XLR mic and 1/4” instrument inputs • 1/4” balanced outputs
• High gain and low-cut switches with 66dB of total gain
• 48V phantom power • 20Hz-80kHz frequency response
#MADMP3 ................................................................... $159.00
m-audio AUDIo BUDDY
The Audio Buddy is a cost-effective two-channel preamp/direct
box for microphones or high-impedance instrument lines. The
compact unit’s front panel features individual gain control and
clip LED’s with 1/4” inputs, while providing dual balanced XLR
inputs with a phantom power switch on the rear. A clean and
simple tool to use, the Audio Buddy is an ideal preamp/direct box
for home studios.
• Compact 2-channel instrument/mic pre with up to 60dB gain
• Ideal for use as a direct box
• Individual gain control with clip LED’s
• 1/4” and XLR inputs with balanced/un balanced 1/4” outputs
• Phantom power
#MAAB .......................................................................... $69.95
aRT
TUBE MP PRojECT SERIES
Improving virtually every aspect of the already popular Tube MP,
the Tube MP Project Series is an ultra-low-noise discrete mic
preamp that effectively handles a wide range of input signals
with minimal coloration. Its 1/4” and XLR inputs pass through a
high-quality 12AX7 tube, selectable lters, and a musical FET
limiter, providing a dynamic 70dB of gain while preserving signal
tonality and clarity.
• Low-noise, tube mic preamp
• Switch selectable input impedance
• Fast FET limiter helps limit overload • Variable I/O controls
• Phase invert and lter switches • 48V phantom power
#ARTMPPS .................................................................... $65.00
410-441 Pro Audio.indd 420 9/29/09 8:44 PM
