Page 28

AFL2-W15B-H61

Step 6: Replace the internal cover and back cover using previously removed retention

screws. Step 0:

3.7 AT/ATX Mode Selection

AT or ATX power mode can be used on the AFL2-W15B-H61. The selection is made

through an AT/ATX switch located on the bottom panel. To select AT mode or ATX mode,

follow the steps below.

Step 1: Locate the AT/ATX switch on the bottom panel (

Figure 3-11).

Figure 3-11: AT/ATX Switch Location

Step 2: Adjust the AT/ATX switch. Step 0:

3.7.1 AT Power Mode

With the AT mode selected, the power is controlled by a central power unit rather than a

power switch. The AFL2-W15B-H61 panel PC turns on automatically when the power is

connected. The AT mode benefits a production line to control multiple panel PCs from a

central management center and other applications including:

 ATM

 Self-service kiosk

 Plant environment monitoring system

 Factory automation platform

 Manufacturing shop flow

3.7.2 ATX Power Mode

With the ATX mode selected, the AFL2-W15B-H61 panel PC goes in a standby mode

when it is turned off. The panel PC can be easily turned on via network or a power switch

in standby mode. Remote power control is perfect for advertising applications since the