AFL2-W10A-N28 Panel PC
Page 4
1.2.1.1 LED Indicators
There are several LED indicators located along the bottom of the LCD screen (7Figure
1-3).
Figure 1-3: LED Indicators
The descriptions of each LED indicator are listed below.
LED Indicator Description
Power
Off: power cord not attached or power supply failure
Blinking amber: the system is connected to a power
source and is ready to be turned on.
Solid blue: the system is turned on.
Power on/off by the hot keys. See
7Table 1-3
AT/ATX Mode
AT: the system is in AT power mode
ATX: the system is in ATX power mode
Controlled by the AT/ATX power mode switch.
CPU Temperature Alert
Blue: CPU temperature is normal.
Red: CPU temperature is too high.
Wi-Fi
On: the Wi-Fi module is enabled
Off: the Wi-Fi module is disabled.
Controlled by the BIOS. See Section
74.5.2
RFID
On: the optional RFID reader is enabled
Off: the optional RFID reader is disabled.
Controlled by the hot keys. See
8Table 1-3
