GB
11
Wash cycles
Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.
Based on the different conditions of use, the wash-cycle duration and data can change.
The number and type of wash cycles and options may vary depending on the dishwasher model.
Wash cycle
Wash cycle
which
include
drying
Options
Approximate
duration of wash
cycles
h:min.
Water
consumption
(l/cycle)
Energy
consumption
(kWh/cycle)
1. Eco Yes No 03:00 10 0,83
2. Intensive Yes No 02:30 14 1,3
3. Normal Yes No 02:00 13,5 1,1
4. Express No No 00:40 9 0,8
5. Soak No No 00:10 4,0 0,01
6. Half Load Yes No 01:20 10,5 0,95
Instructions on wash cycle selection and detergent dosage
1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal
soil level and it is the most efficient cycle in terms of energy and water consumption for this type of crockery.
4 gr/ml**+ 21 gr/ml – 1 Tab
(
**
Quantity of pre-washing detergent)
2. Heavily soiled dishes and pans (not to be used for delicate items). 25 gr/ml – 1 Tab
3. Normally soiled pans and dishes. 4 gr/ml**+ 21 gr/ml – 1 Tab
4. Fast cycle to be used for lightly soiled dishes (Ideal for 2 place settings) 21 gr/ml – 1 Tab
5. Pre-wash for dishes while awaiting completion of the load with the dishes from the next meal. No detergent
6. Ideal cycle for a reduced load of normally soiled dishes. 21 gr/ml – 1 Tab
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Notes:
Optimum performance levels when using the “Express” cycle can be achieved by respecting the specified number of place
settings.
To reduce consumption even further, only run the dishwasher when it is full.
Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following
