Produits de la Marque Hotpoint

Delayed start*

It is possible to delay the start time of the wash cycle by 3,

6 or 9 hours:

1:After selecting the desired wash cycle and any other

options, press the DELAYED START button. the indicator

light will illuminate.

2:Selectthe desireddelaytime bypressingthe Delayed

Start button repeatedly. The wash phase (3 hours), the

dryingphase (6hours) andend (9hours) indicator lights

will illuminate in succession.

If the Delayed Start button is pressed again, the option is

deselected and the indicator light switches off.

3. After the selection process, the countdown will begin if

theStart/Pausebuttonispressed.Theselecteddelayperiod

indicator light flashes and the Start/Pause button stops

flashing (fixed light).

3.Oncethistimehaselapsed,theDELAYEDSTARTindicator

light switches off and the wash cycle begins.

The Delayed Start function cannot be set once a wash

cycle has been started.

Wash options*

The OPTIONS may only be set, changed or reset after

the wash cycle has been selected and before the Start/

Pause button has been pressed.

Only the options whic are compatible with the type of wash

cycle set may be selected. If an option is not compatible

with the selected wash cycle

(see Table of wash cycles)

, the

corresponding symbol flashes rapidly 3 times.

If an option is selected which is not compatible with another

(previously selected) option, it will flash 3 times and switch

off, while the most recently selected option will remain active.

To deselect an option which has been set by mistake, press

the corresponding button again.

Multi-functional tablets* (Tabs)

This option optimises washing and drying results.

When using multi-functional tablets, press the MULTI-

FUNCTIONALTABLETSbutton;thecorrespondingindicator

will light up. If the button is pressed again, the option will be

deselected.

The “Multi-functional tablets” option results in a

longer wash cycle.

The use of tablets is only recommended for models

having this option and it is not recommended with wash

cycles which do not specify the use of multi-functional

tablets

(see Table of options)

Special wash cycles and Options

Notes:

Optimum performance levels when using the “Fast" and "Express

30’”cyclescanbeachievedbyrespectingthespecifiednumber

of place settings.

* The Eco wash cycle complies with regulation EN-50242.

Although it has a longer duration than other wash cycles, it uses

less energy and is less harmful to the environment.

Note for Test Laboratories: forinformationoncomparativeEN

testing conditions, please send an email to the following address:

[email protected]

Half load*

If there are not many dishes to be washed, a half load cycle

may be used in order to save water, electricity and detergent.

Select the wash cycle and press the HALF LOAD button: the

indicator light will illuminate.

Press the HALF LOAD button to deselect this option.

Remember to halve the amount of detergent.

* Only available in selected models.

ACTIVE OXYGEN

This option makes it possible to prevent unpleasant odours

from forming and to improve hygienic conditions inside the

machine.

It should be used between two different wash cycles and

ONLYaftersoiledcrockeryhasbeenloaded.

To start the ACTIVE OXYGEN option press and hold the

button O

Theoptionwillstayactiveeitherfor24hoursor

until the wash cycle is started. More items can be introduced

at any time until full load.