Produits de la Marque Hotpoint

Extra drying

To improve the dryness level of the crockery, press

theEXTRADRYINGbuttonandthesymbolwilllightup.Ifit

is pressed again, the option will be deselected.

A higher temperature during the final rinsing and a longer

drying phase improve the dryness level.

The EXTRA DRYING option increases the duration of

the wash cycle.

Delayed start

It is possible to delay the start time of the cycle for a

period of time between 1 and 24 hours:

1. Select the desired wash cycle and any other options

required,presstheDELAYEDSTARTbutton.Therelevant

symbol starts flashing. Use the buttons + and - to select when

thewashcyclewillstart(h01,h02etc.)

2.ConfirmwiththeSTART/PAUSEbutton.Thesymbolstops

flashing and the countdown begins.

3. Once this time has elapsed, the DELAYED START symbol

switches off and the wash cycle begins.

To deselect the DELAYED START option, press the DELAYED

START button until the text OFF appears.

The Delayed Start function cannot be set once a wash

cycle has been started.

Wash options*

The OPTIONS may only be set, changed or reset after

the wash cycle has been selected and before the Start/

Pause button has been pressed.

Only the options which are compatible with the type of wash

cycle set may be selected. If an option is not compatible

with the selected wash cycle

(see Table of wash cycles)

, the

corresponding symbol flashes rapidly 3 times.

If an option is selected which is not compatible with another

(previously selected) option, it will flash 3 times and switch

off, while the most recently selected option will remain active.

To deselect an option which has been set by mistake, press

the corresponding button again.

Multi-functional tablets* (Tabs)

This option optimises washing and drying results.

When using multi-functional tablets, press the MULTI-

FUNCTIONALTABLETSbutton;thecorrespondingsymbol

will light up. If the button is pressed again, the option will

be deselected.

The “Multi-functional tablets” option results in a

longer wash cycle.

The use of tablets is only recommended for models

having this option and it is not recommended with wash

cycles which do not specify the use of multi-functional

tablets.

Special wash cycles and Options

Short Time option

This option can be used to reduce the duration of the main

wash cycles while maintaining the same washing and drying

performance levels.

Having selected the option, press the Short Time button. To

deselect the option, press the same button again.

Notes:

Optimum performance levels when using the “Fast wash”

and“Express30’”cyclescanbeachievedbyrespecting

the specified number of place settings.

To reduce consumption even further, only run the dishwasher

when it is full.

Note for Test Laboratories: for information on comparative

ENtestingconditions,pleasesendanemailtothefollowing

address:[email protected]

Zone Wash

This option makes it possible to carry out the wash

cycle in the selected rack only. Select the wash cycle and

thenpresstheZONEWASHbutton:theselectedracklights

up and the wash cycle starts in the selected rack only. Press

the button again to deselect the option.

The option is available with the following wash cycles:

Intensive and Normal.

Select the option and the Intensive cycle to start the

ULTRAINTENSIVEZONEwashing.Thiswashcycleisideal

for very soiled mixed loads, e.g. pans and saucepans,

dishes with heavy encrustation or difficult-to-clean crockery

(grater, vegetable mill, dirty cutlery). The spraying pressure is

stronger and the washing temperature higher, thus ensuring

optimum handling of stubborn stains.

Select the option and the Normal cycletostarttheSAVING

ZONEwashing.Thisfunctionmakesitpossibletoreduce

energy consumption. Cycle duration might change.

Remember to load the crockery in the selected rack only