20
How It Works
BLIND SPOT INFORMATION (BSI) SYSTEM
Assists you in determining if there are detected vehicles in your blind spots. Available on
Touring Elite.
A radar sensor on each corner of the rear bumper alerts you when it detects a vehicle
in your left or right blind spots. Minimum operating speed is 20 mph.
When a vehicle is detected in your
blind spot, the blind spot indicator turns
on and stays lit until the area is clear.
When your turn signal is on and a
vehicle is detected, the blind spot
indicator blinks and a beep sounds until
the area is clear or the turn signal is off.
Left BSI indicator shown
21
PARKING SENSOR SYSTEM
Warns you of the proximity between your vehicle and nearby surrounding objects
when parking or backing up.
How It Works
Turning the System On and Off
Corner sensors Rear center sensors
Within about 2 ft.
Within about 3.5 ft.
When the system senses an object, an indicator appears on the MID and center display
screen and a beep sounds. As you get closer to the object, the beep rate increases.
Press the parking sensor
button. A light appears
when the system is on.
Changing Settings
Determine the warning type, or turn the system off.
1. Press SETTINGS. Use the interface
dial to make and enter selections.
2. Select Vehicle Settings.
3. Select Driver Assist System Setup.
4. Select Blind Spot Info.
5. Select an alert type, or turn the
system off.
6. Press BACK to exit the menu.
14 Odyssey TRG_TOURING_ATG_NEW STYLE 4/25/2013 2:37 PM Page 12
