12 13
How It Works
ONE-TOUCH TURN SIGNAL
Use this quick and convenient method to signal a lane change.
• Lightly push the turn signal
lever up or down for a three-
blink sequence.
• For a continuous signal, push
the lever up or down until it
locks into place.
How It Works
DRIVING POSITION MEMORY SYSTEM (DPMS) (
if equipped
)
Store driver’s seat and outside mirror positions into memory for each corresponding
keyless remote (1 or 2), which are recalled when you unlock the driver’s door with
the remote and enter the vehicle.
1. Turn on the vehicle. Make sure
the shift lever is in Park (P).
3. Press SET. You will hear a beep.
2. Adjust your preferred seat and
outside mirror settings.
4. Press the memory button
corresponding to the remote (1
or 2) you are using. You will
hear two beeps.
Note: Stored positions can also be recalled by pressing one of the
memory buttons (1 or 2) on the door.
13 Crosstour TRG_EX EXL_ATG_NEW STYLE 9/18/2012 5:23 PM Page 8
