48 U25339-J-Z126-1-7600
User frames Standard processing in SVP mode
EXECUTION The following functions are executed after the appropriate number is
entered in the input fields:
The functions are executed according to the entries in the CPU SELECT and
STOP/START MODE fields (see table on next page)!
1 CPU STOP stops either the CPU selected in the CPU SELECT
and STOP/START MODE fields or all CPUs
2 INTERRUPT creates an external interrupt for the CPU(s) selected
in the fields CPU SELECT and STOP/START
MODE
3 TOD ENABLE time entry is enabled
4 SYSTEM RESET all CPUs, IOPs, channels and controllers are reset
5 SYSTEM RESET CLEAR as 4; in addition, the working memory is erased
6 STORE STATUS selected CPU is stopped, the status is stored
7 RESTART restarts selected CPU
CPU SELECT => A particular CPU, displayed in the next frame line, can be selected here
for the functions in the EXECUTION selection menu (see above).
0 ... 7 Selection of a particular CPU
STOP/START MODE =>
This can be used to indicate whether the functions in the EXECUTION
selection menu (see above) are to be carried out for all CPUs or only for
the CPU in the CPU SELECT field.
1 ALL CPU all CPUs are selected
2 TARGET CPU only the CPU in the CPU SELECT field is selected
!
