44 U25339-J-Z126-1-7600
Using frames Standard processing in SVP mode
PF 18 Step Executes the next command if the S130 is in Single
Cycle Instruction Mode.
PF 19 ARMSS control Changes the user rights of an existing ARMSS
connection.
PF 20 Stop
only in CE mode : stops the selected CPU
PF 21 Start Starts the selected CPU
PF 22 not assigned
PF 23 Mode Select – Switches to the MODE SELECTION FRAME.
– Erases WRITE-CONSOL message on the screen
(e.g. SHUTDOWN COMPLETED).
– Erases BEL display in screen line 25
– Switches off buzzer on SKP and maintenance
panel of the S130.
PF 24 Mode Change Switches back and forth between FJ-PROGRAM
FRAME and SVP FRAME.
K . . Name Function
Lock message
output
The output (e.g. SET TIME COMMAND COMPLETED) for the SVP
console is delayed for 60 seconds. Each time the key is pressed
again, the lock is prolonged by another 60 seconds.
There is no indication of the lock time.
Refresh /
Clear
The last displayed frame is re-displayed.
All other previous inputs in the current frame are reset.
PF . . P . . Name Function
P18
P19
P20
F1
F2
F3
K3
K1
K2
