[ pg. 18]
Layer 2 Tunneling Protocol (L2TP)
To set up an L2TP connection, enter the type of WAN connection (Static IP or DHCP). After, depending on the type of WAN, follow the instructions
of DHCP or Static IP to fill out the corresponding information. Then, proceed to enter the Username, Password, and Service. Click next when
completed. Once configured, the Internet connection will successfully connect.
MTU: Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. The factory default MTU size of L2TP is
1460. If you wish to manually change the MTU size, set it between 1200 and 1460.
5. When the Internet connection is detected, click Next.
