[ pg. 88]
12. Tools Section
Tools > Admin
In the Admin option of the Tools section, you can change the password used to log in to the router at the login screen by entering the old password,
followed by the new password twice. You can also allow only one computer to edit the settings on the ESR300H by supplying its static IP address.
Remote Management: This allows you to designate a host on the internet to configure the Broadband router and check the router’s status from a
remote site.
Select Enable to enable remote management.
Host Address: Enter the designated host IP Address in the Host IP Address field.
Port: Enter the port number for remote accessing management web interface. The default Port for remote management is 8080.
Click Apply to save the settings.
To access the settings of the ESR300H remotely, enter the router’s WAN IP address and port number of the ESR300H. For example, if your
router’s WAN IP address is 24.24.247.100, and the default port number for remote access is selected, type in http://24.24.247.100:8080 in the
address bar of your browser and click Enter to start the remote access.
