Produits de la Marque Dell

Back to Contents Page

 Power Button Module

Dell™StudioXPS™8100ServiceManual

Removing the Power Button Module

Replacing the Power Button Module



Removing the Power Button Module



1. Follow the procedures in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the front bezel (see Removing the Front Bezel).



4. Remove the optical drive (see Removing the Optical Drive).



5. Remove the top cover (see Removing the Top Cover).



6. Disconnect the power button module cable from the system board connector FP1 (see System Board Components).



7. Press the power button module tabs to release them from the top panel and lift the power button module.



8. Set the power button module aside in a secure location.

Replacing the Power Button Module



WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

cable

power button module

slot

power button module tabs (4)