Produits de la Marque Dell

Cooling Shroud

Removing the Cooling Shroud

CAUTION: The computer will be populated with one or two CPUs. Currently, when there is a single CPU installed,

airflow can bypass CPU1 which increases fan speeds and therefore leads to poor acoustic performance. Adding a

mylar piece in this region redirects airflow across CPU1. The mylar piece will need to be removed when the 2nd

CPU is installed as it is no longer needed and will interfere with the heat sink.

1. Cooling Shroud

2. Mylar — Needs to be removed if two CPUs are installed

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the front bezel.

3. Remove the cover.

4. Gently lift the shroud straight up and away from the system board.