820 Virtual Router Redundancy Protocol Commands
www.dell.com | support.dell.com
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example in Interface Configuration mode displays all configuration
information about the virtual router on the selected interface.
console#show ip vrrp interface brief
Interface VRID IP Address Mode State
--------- ---- -------------- ------ ------------
vlan1 2 0.0.0.0 Disable Initialize
vlan2 5 192.168.5.55 Enable Initialize
show ip vrrp interface stats
Use the
show ip vrrp interface stats
command in User EXEC mode to display the statistical
information about each virtual router configured on the switch.
Syntax
show ip vrrp interface stats
vlan
vlan-id vr-id
•
vlan-id
—
Valid VLAN ID.
•
vr-id
—
The virtual router identifier. (Range: 1-255)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example in Interface Configuration mode displays all statistical information
about the VLAN 15 virtual router.
console>show ip vrrp interface stats vlan 15 5
UpTime............................ 0 days 0 hrs 0 mins 0 secs
