Back View of the Computer
Back Panel Connectors
NOTICE: Ensure that there is a minimum of two inches of space
between all vents and any object near these vents.
NOTICE: Keep the vent area clean and dust-free to ensure that the
computer is adequately ventilated. Use only a dry cloth to clean the
vent area to avoid water damage to the computer.
See the safety instructions in the Product Information Guide for more
information.
Plug USB, audio, and other devices into the appropriate connector.
See Back Panel Connectors for more information.
Access connectors for any installed PCI and PCI Express cards.
l Green — A good connection exists between a 10-Mbps
network and the computer.
l Orange — A good connection exists between a 100-Mbps
network and the computer.
l Off — The computer is not detecting a physical connection to
the network.
network adapter
connector
To attach your computer to a network or broadband device, connect
one end of a network cable to either a network port or your
network or broadband device. Connect the other end of the
network cable to the network adapter connector on the back panel
of your computer. A click indicates that the network cable has been
securely attached.
NOTE: Do not plug a telephone cable into the network connector.
On computers with a network connector card, use the connector on
the card.
It is recommended that you use Category 5 wiring and connectors
for your network. If you must use Category 3 wiring, force the
