
Diskette Configuration Submenu
Event Log Configuration Submenu
Displays the maximum capacity of the primary IDE device.
Displays whether LBA mode control is enabled or not on the primary IDE device.
Displays the multi-sector transfer setting of the primary IDE device.
Displays the PIO mode setting of the primary IDE device.
Displays the ultra DMA setting of the primary IDE device.
Displays the type of cable connected to the primary IDE device.
Configures the floppy drive interface. Options are Enabled (default) and Disabled.
Selects the floppy drive type from Not Installed, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2", 1.44/1.25 MB 3 1/2", or 2.88 MB 3
1/2".
Protects a floppy disk from being written to when set to Enabled. When this option is set to Disabled (default), the floppy disk is not
protected unless the write-protect tab is in place.