© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 8 of 13
Protocols and Features Supported by Cisco 830 Series Secure Broadband Routers
IP/FW/IPSec 3DES
(default feature set)
IP/FW/IPSe
c
3DES PLUS
IP/FW/IPSec 3DES PLUS ISDN
Dial Backup (Cisco 836 router
only)
ATM Fault Management, Operation, Administration and
Maintenance (OAM) (F5) Segment Continuity Check and
Segment and End-to-End Loopback and Interim Local
Management Interface (ILMI) Support (Cisco 836 and 837
routers only)
X X X
Ten Virtual Circuits/Permanent Virtual Circuits (PVCs) X X X
TX Ring Adjustment (Cisco 836 and 837 routers only) X X X
Bandwidth Optimization and Management
IP Multicast — X X
Protocol Independent Multicast (PIM) Sparse Mode — X X
Standard-Based Encryption (STAC) X X X
Ease of Use and Deployment
Cisco SDM X X X
CRWS X X X
Easy VPN Remote — X X
Management
SNMP, Telnet, and Console Port X X X
Syslog X X X
Network Time Protocol (NTP) Client and Server X X X
Trivial File Transfer Protocol (TFTP) Client and Server X X X
Cisco Service Assurance Agent (SAA) X X X
Out-Of-Band Management Through Virtual AUX Port X X X
Out-of-Band Management Through ISDN BRI S/T Port
(Cisco 836 router only)
Cisco 836 router Cisco
836 router
Cisco 836 router
Redundancy
Hot Standby Router Protocol (HSRP) — X X
Dial Backup with External Modem Through Virtual AUX Port X X X
